SK755

SK755 Compact Tool Carrier
The Ditch Witch® SK750 and SK755 are built to outperform on any jobsite. Both models feature a high-drive track system along with an enhanced operator station, delivering superior performance through increased ground clearance, more lift capacity, faster ground speed, longer track life, and more operator comfort. And by sending more horsepower to the attachment than the competition, these SK mini skid steers will help make you more productive, job after job. Not White. Not Red. Only Orange.
Key Features
  • Efficient, low-maintenance Kubota diesel engines provide outstanding power for all machine functions— 32.8 hp.
  • Belt-free design eliminates worries about slipping, squeaking and breaking.
  • Industry-leading power to the attachment provides unbeatable productivity; accepts more than 70 attachments for a wide range of utility, landscaping, plumbing, and other underground construction tasks.
  • 800-lb rated operating capacity and an 81-inch hinge-pin height enables more productive loading.
  • Low-maintenance track tensioning system features a grease cylinder for easy adjustment and track removal, delivering longer life and minimizing downtime.
  • Two-way auxiliary control foot pedal enables you to maintain hydraulic flow to the attachment with the pedal, freeing up your hands to control depth and ground speed.
  • Innovative high-drive track system features bolt-on sprockets and wide track rollers for greater stability, longer track life and easy maintenance.
  • Ergonomic operator’s station comes standard with dual lever ground drive controls or the option of a single lever joystick.
Specifications
SK755
Dimensions
Operating height, max., std. bucket
103 in
Hinge pin height, max.
81 in
Overall height of machine
57 in
Overall length of machine, std. bkt
105 in
Overall length of loader, no attach.
86 in
Wheelbase/track length
43 in
Dump height, max. std. bucket
64 in
Reach fully raised, std. bucket
17 in
Min. ground clearance (center/side)
8.9/3.7 in
Angle of departure
27°
Bucket rollback angle, ground level
25°
Bucket rollback angle, full height
90°
Dump angle, std. bucket
35°
Bucket width, max.
44 in
Bucket width, min.
36 in
Track width, max.
42 in
Track width, min.
36 in
Loader width, excluding tracks
35 in
Swing radius, max., std. bucket
65 in
Swing radius, no attach.
44 in
Rear overhang, max.
29 in
Power
Engine
Kubota D1105
Fuel
Diesel
Number of cylinders
3
Displacement
68.5 in³
Bore
3.07 in
Stroke
3.09 in
Manufacturer's gross power rating
32.8 hp
Rated engine speed
3000 rpm
Emissions compliance
EPA Tier 4i
Power – TIER 4
Power – TIER 4i
Operation
Ground drive speed
Forward
4.7 mph
Reverse
4.7 mph
Ground pressure*
7-inch tracks
4.8 psi
9-inch tracks
3.8 psi
Tipping capacity
2285 lb
Operating capacity (35° of tipping capacity)
800 lb
Machine weight (no attachment, fluids full)
2890 lb
*Includes machine weight, 175 lb bucket and 165 lb operator
**Exceeding these operating angles will cause engine damage. This DOES NOT imply that the machine is stable to maximum angle of safe engine operation.
Hydraulic System
Auxiliary circuit
double gear pump
Flow Rate (pump #1)
8.5 gpm
Flow Rate (pump #2)
5 gpm
Pressure
3000 psi
Ground drive
dual hydrostatic pumps
Flow rate
13.9 gpm
Pressure
3500 psi
Fluid Capacities
Hydraulic reservoir capacity
9.2 gal
Engine oil, with filter
4.2 qt
Fuel tank capacity
10.5 gal
Battery
SAE reserve capacity rating
110 min
SAE cold crank rating @ 0° F
800 amps
Electrical system
12V
Additional Compact Tool Carriers
Posted in Compact Tool Carriers, Compact Utility