2022 American Augers Auger Boring Machines 60-1200 Tier 3
- Year 2022
- Make American Augers
- Model Auger Boring Machines
- Engine Model: TCD914LO6 Tier 3
2022 American Augers Auger Boring Machines 60-1200 Tier 3
2022 American Augers Auger Boring Machines 60-1200 Tier 3
Features may include:
Highly Productive Rack & Pinion pulls the machine back to its starting point on the track quickly – no dogging or winching.- Increased ability to pull auger, steering rods, and push product
- Increased visibility to the master pusher
- Low Centerline and Wide Stance provide increased stability
- A hydraulically assisted clutch is easier and more comfortable to operate
- No Hook Rollers, the machine locks safely to the track
- An ergonomic operating button allows for feathering the rotation and slow turn of the shaft for easy auger installation
- Emergency shutdown switch at the operator’s station as well as an operator presence tethered switch
- Vivid graphics guide safe and proper machine operation
- Updated gauge system includes the improved engine tachometer, engine warning light, & hydraulic thrust pressure reading
Engine
Engine Manufacturer
Deutz
Engine
Model: TCD914LO6 Tier 3
Engine Power
174 HP (130 kW)
Rated Engine Speed
2300 RPM
Engine Torque, Maximum
373 ft-lbs. (505.7 Nm) @ 2300 RPM | 468 ft-lbs. (634.5 Nm) @ 1600 RPM
Fuel System
Fuel Type
Diesel
Drivetrain
Transmission
Eaton FS-5205A, 5-speed
Clutch
Spring applied with 14 in. (356 mm) diameter single disk pneumatically-assisted clutch actuator
Gearbox
Ratio: 38.8:1
Operational
Operating Conditions
Maximum Thrust: 1,200,000 lbs. (544 Tonnes)
Lights and Safety
Lighting
Work Lights: 12 Volt
Dimensions
Dimensions
Master Pusher Diameter: 60 in. (1,524 mm) | Master Pusher Working Range: 24 in. – 60 in. (610 – 1,524 mm) Casing Diameter | Master Pusher Hex Drive: 5 in. (127 mm) | Centerline: 36.02 in. (915 mm)
Bore
Hydraulic Thrust Cylinder: 9 in (229 mm)
Stroke
Hydraulic Thrust Cylinder: 35 in (889 mm)
Length
14 ft. 7 in. (4.43 m)
Width
7 ft. 1 in. (2.16 m)
Height
7 ft. 5 in. (2.27 m)
Track Length
Master: 15 ft. (4.57 m) w/1 mm (38 mm) back plate | Extension: 10 ft. (3 m)
Track Width
Master: 7 ft. 4 in. (2.23 m) | Extension: 7 ft. 4 in. (2.23 m)
Capacities
Fuel Capacity
39 U.S. Gallons (148 L)
Hydraulic Capacity
22 U.S. Gallons (83 L)
Weights
Weight
Base Unit (Split Weight): 8,900 lbs. (4,037 kg) | Power Pack (Split Weight): 8,600 lbs. (3,901 kg) | Master Pusher: 2,390 lbs. (1,084 kg) | Master Track: 7,100 lbs. (3,221 kg) | Lifting Sling: 550 lbs. (249 kg) | Total: 27,540 lbs. (12,492 kg) | Extension Track: 5,600 lbs. (2,540 kg) each | Master Saddle: 270 lbs. (123 kg)
Features
Features
Quik Split: The Quik Split frame design allows the machine to be separated into sections to accommodate lighter and faster lifts into and out of the bore pit and aids the operator in being able to facilitate better and safer machine positioning. | Quik Tran: Quik Tran is the fast return system, made available exclusively from American Augers, as it provides up to 10,000 lbs. (4,536 kg) of push/pull at high speed, and there will be no dogging or winching during retract, as the Quik Tran system engages directly to the machine track. Quik Trans benefit will be easier machine operation in challenging work climates or conditions. | Spoil Door: With a Safety-First commitment all American Augers horizontal earth boring machines are equipped with a gravity activated-manual spoil door, which deflects thrown debris from the spoil chamber. | Master Saddle: 60 in. (1,524 mm) compatible