2022 American Augers Auger Boring Machines 60-1200 Tier 4

Information

2022 American Augers Auger Boring Machines 60-1200 Tier 4

Features may include:

Highly Productive Rack & Pinion pulls the machine back to its starting point on the track quickly – no dogging or winching.
  • Increased ability to pull auger, steering rods, and push product
  • Increased visibility to the master pusher
  • Low Centerline and Wide Stance provide increased stability
  • A hydraulically assisted clutch is easier and more comfortable to operate
  • No Hook Rollers, the machine locks safely to the track
  • An ergonomic operating button allows for feathering the rotation and slow turn of the shaft for easy auger installation
  • Emergency shutdown switch at the operator’s station as well as an operator presence tethered switch
  • Vivid graphics guide safe and proper machine operation
  • Updated gauge system includes the improved engine tachometer, engine warning light, & hydraulic thrust pressure reading

Photos

Highlights

  • , Midwest
  • 2022
  • American Augers
  • Auger Boring Machines 60-1200 Tier 4
  • Model: TAD571VE Tier 4f
  • Eaton FS-5205A, 6-speed
  • Diesel
  • Available
  • 7 ft. 3 in. (2.21 m)
  • 7 ft. 6 in. (2.29 m)

    • Specifications

    • 2022
    • American Augers
    • Auger Boring Machines
    • 60-1200 Tier 4
    • General
    • Model: TAD571VE Tier 4f
    • Volvo
    • 174 HP (130 kW)
    • 2200 RPM
    • 395 ft-lbs. (536 Nm) @ 2200 RPM | 597 ft-lbs. (809 Nm) @ 1200 RPM
    • Diesel
    • Eaton FS-5205A, 6-speed
    • Spring applied with 14 in. (356 mm) diameter single disk pneumatically-assisted clutch actuator
    • Ratio: 38.8:1
    • Maximum Thrust: 1,200,000 lbs. (544 Tonnes)
    • Work Lights: 12 Volt
    • Master Pusher Diameter: 60 in. (1,524 mm) | Master Pusher Working Range: 24 in. – 60 in. (610 – 1,524 mm) Casing Diameter | Master Pusher Hex Drive: 5 in. (127 mm) | Centerline: 36.02 in. (915 mm)
    • Hydraulic Thrust Cylinder: 9 in (229 mm)
    • Hydraulic Thrust Cylinder: 35 in (889 mm)
    • 14 ft. 10 in. (4.52 m)
    • 7 ft. 3 in. (2.21 m)
    • 7 ft. 6 in. (2.29 m)
    • Master: 15 ft. (4.57 m) w/1 mm (38 mm) back plate | Extension: 10 ft. (3 m)
    • Master: 7 ft. 4 in. (2.23 m) | Extension: 7 ft. 4 in. (2.23 m)
    • 48 U.S. Gallons (182 L)
    • 22 U.S. Gallons (83 L)
    • Base Unit (Split Weight): 8,900 lbs. (4,037 kg) | Power Pack (Split Weight): 11,500 lbs. (5,216 kg) | Master Pusher: 2,390 lbs. (1,084 kg) | Master Track: 7,100 lbs. (3,221 kg) | Lifting Sling: 550 lbs. (249 kg) | Total: 30,440 lbs. (13,807 kg) | Extension Track: 5,600 lbs. (2,540 kg) each | Master Saddle: 270 lbs. (123 kg)
    • Quik Split: The Quik Split frame design allows the machine to be separated into sections to accommodate lighter and faster lifts into and out of the bore pit and aids the operator in being able to facilitate better and safer machine positioning. | Quik Tran: Quik Tran is the fast return system, made available exclusively from American Augers, as it provides up to 10,000 lbs. (4,536 kg) of push/pull at high speed, and there will be no dogging or winching during retract, as the Quik Tran system engages directly to the machine track. Quik Trans benefit will be easier machine operation in challenging work climates or conditions. | Spoil Door: With a Safety-First commitment all American Augers horizontal earth boring machines are equipped with a gravity activated-manual spoil door, which deflects thrown debris from the spoil chamber. | Master Saddle: 60 in. (1,524 mm) compatible